Purchase of secondary raw materials
Purchase of secondary raw materials
Copper-Com Ltd also purchases copper and brass secondary raw materials, and their classification is as follows:
Copper scrap
- Copper tubes of more than 1.0 mm wall-thickness
- Copper rods
- Stripped copper rope made of wire with over 1.0 mm in diameter
- Copper sheets and strips with over 1.0 mm in thickness
- Copper busbars with over 2.0 mm in thickness
- Copper granules over 1.0 mm
- Copper Litz braids
- Punch press machine waste more than 1.0 mm thick
- Copper tubes of less than 1.0 mm wall-thickness
- Stripped copper rope made of wire with under 1.0 mm in diameter Copper
- sheets and strips with under 1.0 mm in thickness
- Copper granules up to 1.0 mm
- Punch press machine waste less than 1.0 mm thick
- Varnished wires
- Litz wires
- Wires with a tin, nickel, zinc coating, regardless of size
- Copper shavings with max 0.5% oil, moisture and emulsion
Brass scrap
- Clean industrial waste or unused CuZn28-CuZn37 alloy material, originated from sheets, strips, tubes, wires, rods, lamellas…
- Clean industrial waste made out of CuZn36-39 Pb1 1.0-3.5 alloys, originated from pressed and towed products without coatings. This type of waste also includes ingots weighing up to 30 kg
- Large casings made out of CuZn28-30 alloys
- Small casings made out of CuZn28-30 alloys
- Collected brass used for household purposes
- Brass shavings made from automatic brass CuZn36-39 Pb1.0-3.5% and small bits of wires and rods. Up to a maximum of 0.5% of oil, moisture and emulsion is allowed, but has to be without Fe shavings and non-metallic impurities.
Copper-com company has all of the required permits for collection, transport, storage and treatment of non-hazardous waste.